Category Archives: International Journal of Community Science and Technology

Untitled4


Vol 1, No 1 Year (2015)

CONTENT

Home Science

  1. TEXTILE RECYCLING PRACTICES PREVAILING IN KANPUR CITY – Disha Patel, Ritu Pandey 

  2. CLOTHING NEED ASSESSMENT OF FEMALE PATIENTS HAVING FRACTURE IN LOWER ARM – Soni Singh, Archana Singh and Shweta Tuteja 

  3. WEAVING FLAX: A WAY FORWARD – Ritu Pandey

  4. EMPOWERING WOMEN THROUGH SKILL DEVELOPMENT IN GARMENT CONSTRUCTION – Neeraj Devi, Archana Singh, Poonam Singh and Anjani Kumar Singh 

  5. Agriculture

  6. EFFECT OF PLANT GEOMETRY AND NUTRITION ON THE PHENOLOGICAL TRAITS AND CHEMICAL COMPOSITION OF POD OF OKRA (ABELMOSCHUS ESCULENTUS ‘L’) CV. PUSA SAWANI -J.P. Singh and Shravan Kumar


  7. IMPACT ASSESSMENT  OF FARMYARD MANURES AND MICROBIAL INOCULANTS SUPERIMPOSED OVER INORGANIC FERTILIZERS ON THE PRODUCTION AND PRODUCTIVITY OF WHEAT (TRITICUM AESTIVUM L.) -V.K. Verma, Vishram Singh, Ram Pyare, A.K. Srivastava, D. D. Yadav, Ramakant Yadav and Pyush Goyal

  8. Management

  9. SCOPE OF CONTRACT FARMING WITH REFERENCE TO FARMERS OF INDIA – Rajeev Singh and Mridulesh Singh 

  10. Mechanical

  11. HISTORICAL REVIEW OF BIOMASS COOK STOVE DEVELOPMENT -Arvind Kumar, Manohar Prasad, K P Mishra

Reviewer

Reviewer

On logging in to the journal, you will arrive at the User Home page.    

Figure 1. Reviewer HomeR1

To see the submissions you need to review, click the Reviewer link, or click the “x” Active link. Both will take you to your active Submissions page.

Clicking on the linked title will take you to the review process.

Figure 2. Active SubmissionsR2

Review

You will first see a summary of the submission details.

Figure 3. Review AssignmentR3

Next, you will see the review schedule, and the associated deadline.

Figure 4. Review ScheduleR4

Next, the Review process is divided into five steps (depending upon the Journal Setup).

Reviewer Performs Review. Upon receipt of the reviewer request email, the reviewer will click on the included URL and be presented with a list of steps:

Figure 5

review


Following these steps one at a time, beginning with confirmation of whether or not the review request is accepted, will complete the review. Once the review has been completed, the Editor will be able to see the results on the submission’s Review page.
R6

Prof. D P Mishra

10846306_805874689474815_2830973874117251532_n (2)

 

 

Dr.D.P.Mishra
Professor
Department of Aerospace Engineering
Indian Institute of Technology Kanpur

E-mail: mishra[AT]iitk.ac.in

Ph: +91-512-2597125 (Off) / 2597851 (Lab) / 2598695 (Res)

Fax: +91-512-2597561

B. Sc (Engg – Mechanical Engg.) – Sambalpur University, 1987

Ph. D. (Mechanical Engg.) – Indian Institute of Science, Bangalore, 1994

Research Experience

Duration
Organization
Areas
Feb,1996-till date Teaching Faculty
Department of Aerospace Engineering IITKanpur- 208 016
Combustion & Heat Transfer
Nov,1994-Feb 1996 Senior Research Engineer,
Engineering Mechanics Research Corporation , Bangalore-560 001
Combustion & CFD
June,1993-Nov, 1994 Research Associate,
Aerospace Engg. Dept., IISc, Bangalore
Flame

Teaching Experience

Duration
Organization
Areas
Feb,1996-till date Department of Aerospace Engineering
IIT Kanpur- 208016
Combustion, Propulsion , Thermodynamics,
Fluid Mechanics
May 1987-June 1988 Department of Mechanical Engineering
Orissa College of Engineering
Thermal Engineering

 

Major Projects Completed

Sponsored Projects

Sl. No.

Title of the project

Total cost
(lakh)

Agency

Present status

PI/Co-investigator

1. Experimental and Computational  Studies of Natural Gas-Air Flame

2.3

DST, New Delhi

Completed

Nil

2. An Experimental Study of  Flame Impingement Heat Transfer

5.3

CSIR, New Delhi

Completed

Nil

3. An experimental study of droplet burning in recirculation flow field

18.00

ISRO

Completed

A. Kushari

4. An experimental study of turbulent premixed co-axial jet flames

7.18

ARDB, New Delhi

Completed

Nil

5. An Experimental Study of Low Emission Energy efficient Burner

19.00

MHRD, New Delhi

Completed

Nil

6. An Experimental Study of Diffusion Jet Flame with Highly Preheated Air

19.82

DST, New Delhi

Completed

Nil

7. Design and Development of Low Emission LPG Burner

11.34

PCRA, New Delhi

Completed

Nil

8. Design and Development of an Improved Wood Stove

4.48

CST, Lucknow

Completed

Nil

9. Experimental Study of Water Mist System for Fire Suppression

11.06

CSIR, New Delhi

Completed

Nil

10. Synthesis and characterization of carbon-nanotubes on the surface of glass fiber and its composite in epoxy matrix

32.5

DST, New Delhi

Completed

K K Kar

10. Experimental Study of an Internally Mixed Swirl Coaxial Atomizer for Scramjet Engine

9.01

ISRO-IITK Space Cell

Completed

Nil

11. Flame Synthesis of Silica Nanopowders

12.78

ARDB, New Delhi

Completed

Nil

12. Experimental Study of Aerated Liquid Injection into Subsonic Flow

12.05

ARDB, New Delhi

Completed

Nil

13. Numerical and Experimental Study Droplet Combustion under Normal and Microgravity Conditions

18.63

ISRO, Bangalore

Completed

Nil

14. Experimental Study of Liquid Fuel Combustion using Chemiluminescence Sensor

22.4

DRDO, New Delhi

Completed

Nil

15. Experimental Studies of Coke Formation Liquid Fuel for Scramjet Application

9.9

DMSRD, Kanpur

Completed

Nil

Consultancy Projects

Sl. No

Period

Organization

Title of Project & Nature work

Co-investigator

1 1997 Tata Energy Research Institute, New Delhi Design and development of a burner for producer gas burner Nil
2 2003-05 DRDL, Hyderabad Development of Endothermic Fuels Prof. D. Kunzru
3 2005-06 Achintya Gamut Omni India Effect of Additives on the Coal Combustion Nil
4 2006-07 Delhi Metro Rail Corporation Ltd, New Delhi Thermal  Analysis of  Flow over a Train in a Tunnel Dr. T. K. Sengupta
5 2006-2007 Jindal Stainless Steel Ltd. Soaking Pit Furnace Design Nil
6 2006-07 Achintya Gamut Omni India Effect of Additive on Specific Fuel Consumption and Emission Level of a Dies Engine Nil

 

Current Projects

Sl No

Period

Sponsoring  Organization

Total Cost
(in lakhs)

Title of Project

Co-investigator

1. 2009-2011 BRNS, Mumbai

29.98

Design and Simulation of Pneumatic Nozzle Dr. V. K. Jain
2. 2010-2012 MNRE,
New Delhi

23.9

Design and Development of a Hydrogen Burner for Industrial Application Dr. M Das
3. 2010-2012 MHRD, New Delhi

40.4

Virtual Combustion and Atomization Lab Nil
4. 2010-2012 DST, New Delhi

26.1

Experimental Studies of Trapped Vortex Combustor Nil
5. 2010-2012 DRDL, Hyderabad

9.95

Experimental Studies on Spray Characteristics of Kerosene Gel Propellant Nil
Research Publications in Journals
1. D. P. Mishra, P. J. Paul and H. S. Mukunda, “Stretch Effects Extracted from Inwardly and Outwardly Propagating Spherical Premixed Flames”, Combustion and Flame, 97, pp 35-47, 1994.

2. D. P. Mishra,, P. J. Paul and H. S. Mukunda, “Stretch Effects Extracted from Propagating Spherical Premixed Flames with Detailed Chemistry”, Combustion and Flame, 99, pp.379-386,1994.

3. D. P. Mishra and A Rahaman, “An Experimental Studies of Flammability Limits of LPG/Air Mixtures”, Fuel, 82, pp.863-866, 2003.

4. D. P. Mishra and R Kannan, “An Experimental of Lean Premixed Combustor”, International Journal of Turbo & Jet Engines, 20, No 3, pp. 245-253, 2003.

5. D. P. Mishra, “Effects of Initial Temperature on the Structure of Laminar CH4–Air Premixed Flame”, Fuel, 82, page 1471-1475, 2003

6. D. P. Mishra and R Kannan, “Experimental Investigation of Lean Premixed Swirl Burner”, International Journal of Turbo & Jet Engines, 21, No2, pp.103-113, 2004.

7. D. P. Mishra, “Emission Studies of Impinging Premixed Flames”, Fuel, 83, pp. 1743-1748, 2004.

8. D. P. Mishra, “Numerical Studies of Stretched CH4-Air Cylindrical Premixed Flames”, Fuel, 83, pp. 2345-2350, 2004.

9. Shreekanta Dash, G. C. Dash, and D. P. Mishra, “Unsteady MHD flow of blood through an indented tube with atherosclerosis”, J. AMSE, 73, No 4, pp. 19-30, 2004.

10. Shreekanta Dash, G. C. Dash, and D. P. Mishra, “Unsteady magneto hydrodynamic flow of a second-order fluid in a rectangular channel.” J. AMSE, 73, No 6, pp. 75-86, 2004.

11. D. P. Mishra, “Numerical Modeling of Lean CH4-Air Combustion”, Journal of AMSE, Vol 74, No 5, pp.53-62 2005.

12. D. P. Mishra and Vishak T, “Numerical Simulation of Cold Flow in an Axisysmmetric Dump Combustor”, International Journal of Turbo & Jet Engines, 22, p.237-253,2005.

13. D. P. Mishra and D. Mishra, “Augmentation of Local and Average Heat Transfer to an Impinging Air Jets Using Orifice”, International Journal of Turbo & Jet Engines, 22, 225-235, 2005.

14. Mishra D P and T. Desai, “Numerical Study of Mixed Convection Heat Transfer from Thermal Sources on a Vertical Surface”, J. AMSE, B 74 (1), pp. 31-44, 2006.

15. Mishra D P and A Rahaman, “An Experimental Study of Stability Limits of LPG-Air Premixed Flames” Journal of Institute of Engineers (India), vol 87, p. 22-24, 2006

16. D. P. Mishra, “Effect of Nozzle Geometry of Turbulent Jet on the Impingement Heat transfer to a Flat Plate”, International Journal of Turbo & Jet Engines, vol 23, No 2, p. 87-96, 2006.

17. Yoshida A, Naito H, Mishra D P, “Structure of Distributed Reaction Zone in a Well–stirred Reactor, Journal of the Combustion Society of Japan, vol48, No 144, p. 198-205, 2006.

18. D. P. Mishra, “Experimental Studies of Flame Stability Limits of CNG-air Premixed Flame”, Energy Conversion and Management, V48, 4, p. 1208-1211, 2007.

19. D. P. Mishra and S. Kuchibhatla, “Numerical Studies of a Novel Vortex Combustor, International Journal of Turbo & Jet Engines, Volume 24, No. 2, 2007.

20. Kiran D. Y. and D. P. Mishra “Experimental Studies of Flame Stability and Emission Characteristics of Simple LPG Jet Diffusion Flame”, Fuel, V86,10-11, , P 1545-1551, 2007

21. D. P. Mishra and Vishak T, “Computational Studies of Turbulent Premixed Flame Based Dump Combustor” Fuel, V86, 17-18, 2007.

22. D. P. Mishra and A Maji, “Numerical Studies of Combustion of Single n-Heptane Droplet”, Arcivum Combustionis, V27, No.1-2, pp.45-54, 2007.

23. P. Kumar and D. P. Mishra “Experimental Investigation of Laminar LPG-H2 Jet Diffusion Flame”, International Journal of Hydrogen, 33, p.225-231, 2007

24. D. P. Mishra and A Maji, “Experiment and Numerical Studies of Combustion of Single n-Heptane Droplet”, Journal of Institution of Engineers (India), V88, P. 3-9, 2007.

25. Yoshida A, Naito H, Mishra D P, “Turbulent Combustion of Preheated Natural Gas-Air Mixture, Fuel, 2007.

26. K. U. Reddy and D. P. Mishra, “Studies on Spray Behavior of a Pressure Swirl Atomizer in the Transition Regime”, Journal of Propulsion and Power, vol 24, No1 , P. 74- 80, Jan-Feb2008.

27. Shreekanta Dash, G. C. Dash, and D. P. Mishra, “MHD Flow through a porous medium past a stretched vertical permeable surface in the presence of heat sources/sink and a chemical reaction”, Proceedings of the National Academy of science, India (Section A) , vol 78, Pt 1, 2008.

28. D. P. Mishra, “An Experimental Study of an Impinging LPG/Air Premixed Flame, Journal of Institution of Engineers (India), v88, 1-7, 2008.

29. D. P. Mishra, “Experimental Studies of Low Emission LPG Vortex Burner”, International Journal of Turbo & Jet Engines, 2008, vol25, No1, p. 27-35.

30. D. P. Mishra and N. Goyal, “Experimental Study of Internally Mixed Twin-Fluid Liquid Atomizer”, International Journal of Turbo & Jet Engines, Vol 25, No 2, p. 105-110, 2008.

31. D. P. Mishra and P. Kumar, “Experimental investigation of laminar LPG–H2 jet diffusion flame with preheated reactants, Fuel, 87, p. 3091-3095, 2008.

32. S Mahesh and D. P. Mishra, “Flame Stability and Emission Characteristics of Turbulent LPG IDF in a Backstep Burner”, Fuel, 87, 2614–2619, 2008.

33. P. Kumar and D. P. Mishra, “Effects of Bluff-Body Shape on LPG-H2 Jet Diffusion Flame, International Journal of Hydrogen, Volume 33, Issue 10, May 2008, p. 2578-2585.

34. P. Kumar and D. P. Mishra, “Characterization of Bluff-Body Stabilized LPG Jet Diffusion Flame with N2 Dilution”, Energy Conversion and Management, Volume 49, Issue 10, October, P. 2698-2703, 2008.

35. D. P. Mishra and P. Kumar, “Experimental Study of N2 Dilution on Bluff-Body Stabilized LPG Jet Diffusion Flame with Preheated Reactant”, Combustion, Explosion, and Shock Waves, Vol. 45, No. 1, p. 1–7, 2009.

36. D. P. Mishra and Kiran Kumar D. Y., “Experimental Studies of the Bluff-body Stabilized Diffusion Flames”, Fuel, 88, 573–578, 2009.

37. S Panda, A Uppadhaya, D. P. Mishra, “Effect of Varying Gas-Flow Conditions on the Characteristics of the Diffusion Flame and Silica Powders Prepared using Flame Combustion Synthesis”, Journal of Powder Technology, 191, 164-169, 2009.

38. D. P. Mishra and A Verma, “Study of Downward Smoldering of Combustion in Polyurethane Foams”, Archivum Combustionis, V 29,No. 3-4, 73-80, 2009.

39. D. P. Mishra and Maheshwari M, “An Experimental Study of Flame Spread over an Inclined Thin Fuel Surface”, Archivum Combustionis, V 29,No. 3-4, 101-110, 2009.

40. K. V. Sridhar and D. P. Mishra, “Numerical Investigation of Direct Fuel Injection from the Cavity Walls in 2D Supersonic Combustor”, International Journal of Turbo & Jet Engines, 26, 155-168, 2009

41. N.S. Karan, A. Agrawal, P.K. Pandey, P. Smitha, S.J. Sharma, D. P. Mishra, N.S. Gajbhiye, “Diffusion Flame synthesis of Hollow, Anatase TiO2 Nanoparticles”, Materials Science and Engineering: B, V 163, Issue 2, 128-133, 2009.

42. D. P. Mishra and P Kumar, “Experimental study of bluff-body stabilized LPG-H2 jet diffusion flame with preheated reactant” Fuel, V 89, p.212–218, 2009.

43. Ashok Kumar, Ashok Kumar, D. P. Mishra, and Jitendra Kumar, “Flame Aerosol Synthesis And Characterization of Pure And Carbon Coated Titania Nano Powder”, Journal of Aerosol Sciences, V 40, 720-730, 2009.

44. S. Y. Jejurkar and D. P. Mishra, “A Review of Recent Patents on Micro-combustion and Applications” Recent Patents on Engineering, V3, No.3, Pp. 194-209, 2009.

45. D. P. Mishra and R Sundharsan, “ Numerical Analysis of Fuel-Air Mixing in a 2D Trapped Vortex Combustor”, Proc. IMechE, Part G: J. Aerospace Engineering, 224(G1), 65-75, 2009,

46. D. P. Mishra, “Stability and Emission in a LPG-Air Premixed Coaxial Jet Flame Burner under a Wide Range of Operating Condition” International Journal of Chemical Reactor Engineering, Vol. 7: P. 64, 2009.

47. D. P. Mishra and K. V. Sridhar, “Numerical Investigation of Direct Fuel Injection from the Cavity Walls in 2D Supersonic Combustion”, International Journal of Turbo & Jet Engines, 26, 155-168, 2010.

48. S Mahesh and D. P. Mishra, Flame structure of LPG-air Inverse Diffusion Flame in a backstep burner, Fuel, 89, 8,  2145-2148, 2010.

49. D P Mishra and P Kumar, “Effects of N2 Gas on Preheated Laminar LPG Jet Diffusion Flame, Energy Conversion and Management, 51, P. 2144-2149, 2010.

50. D P Mishra and Singh H J, Numerical Studies of Bluff-Body Stabilized Lean Premixed Flame Based Combustor, Archivum Combustionis, 30, 1-2, P. 63-84,  2010.

51. D P Mishra  and K. V. Sridhar, “Cold Flow Studies on the Effect of Injector Locations in a Directly Injected Cavity Based Combustor”, International Journal of Turbo & Jet Engines, vol 27, No 1, 51-62, 2010.

52. Jejurkar S  J  and  D. P. Mishra, “Numerical Characterization of A Premixed Flame Based Annular Microcombustor”, International Journal of Hydrogen, 35, 18, P.9755-9766, 2010.

53. D P Mishra, Anish Upadhaya, and S S Panda, “Experimental Study of Silica Nano-Powder Synthesis using a Diffusion Flame Reactor”, International Journal of Chemical Reactor Engineering, Vol. 8: A149, 2010.

54. Swarup J  and  D. P. Mishra, “Thermal Performance Characteristics of a Microcombustor for Heating and Propulsion”, Applied Thermal Engineering,  V 31:521-527 2010.

55. P. K. Ezhil Kumar, and D. P. Mishra, “Numerical Modeling of an Axisymmetric Trapped Vortex Combustor”, International Journal of Turbo & Jet Engines, Volume 28, Issue 1, pp. 41–52, 2011.

56. M. Muralidhar, P. K. Ezhil Kumar, and D. P. Mishra, “Experimental Investigation of a Twin Fluid Atomizer Spray Using a Laser Based Optical Patternator”, International Journal of Turbo & Jet Engines, Vol. 28, Issue 1,  pp. 109–117, 2011.

57. S Mahesh and D. P. Mishra, Study of Turbulent Inverse Diffusion Flame in Recessed Backstep and Coaxial Burners, Combustion, Explosion, and Shock Waves, 4, 2011.

58. Swarup J and  D. P. Mishra, “Flame Stability Studies in a Hydrogen-Air Premixed Flame Annular Microcombustor”,   International Journal of Hydrogen, vol 36, issue 12, Pages 7326-7338, 2011.

59. P. K. Ezhil Kumar and D. P. Mishra, “Numerical Simulation of Cavity Flow Structure in an Axisymmetric Trapped Vortex Combustor”, Aerospace Science and Technology, doi:10.1016/j.ast.2011.04.007.

Papers Published in Conferences
1. D P Mishra, P. J. Paul and H. S. Mukunda, “Stretch Effects Extracted from Propagating Spherical Premixed Flames with Detailed Chemistry”, 24th Symposium (International) on Combustion, pp.379-386,1994.

2. D P Mishra, P. J. Paul and H. S. Mukunda, “Flame Speeds of Wood Gas At Ambient And Engine Operating Conditions”, Proceedings of Recent Advances in Biomass and Gasification Technology,1991.

3. D P Mishra, P. J. Paul and H. S. Mukunda, “Computational Studies of Premixed CH4—air Flames Including Detailed Kinetics”, Proceedings of XII National Conference on I. C. Engines and Combustion, pp. 471-480, Tata McGraw Hill Publishing Company Ltd, 1992.

4. P. C. Chakrabarty, D P Mishra, P. J. Paul and H. S. Mukunda, “The Theoretical Calculations of The Limits of Flame Propagation For Producer Gas Mixture”, Proceedings of Recent Advances in Biomass Gasification and Technology, 1993, pp. 28-37, Interline Publisher.

5. D P Mishra, P. J. Paul and H. S. Mukunda, “Computational Studies of the Ambient Parameters on Stretched H2/Air Premixed Flames with Detailed Kinetics”, Proceedings of XIII National Conference on I. C. Engines and Combustion, 1994, pp. 277-283, Tata McGraw Hill Publishing Company Ltd.

6. D P Mishra, P. J. Paul and H. S. Mukunda, “Computational Prediction of Flame Speed of Producer Gas and Comparison with Experiments”, Proceedings of XIII National Conference on I.C. Engines and Combustion, 1994, pp. 256-262, Tata McGraw Hill Publishing Company Ltd.

7. D P Mishra, P. J. Paul and H. S. Mukunda, “Computation of 2D Reacting Gas Phase in Sandwich Solid Propellant”, Proceedings of Second National Conference on Air Breathing Engines and Aerospace Propulsion, 1994, pp.462-471, Interline Publisher.

8. A. K. Nayak, S. Pal and D P Mishra, “Adaptive Finite Element Studies of Both Incompressible and Compressible Flow”, Proceedings of 22nd National Conference on Fluid Mechanics and Fluid Power, 1995, pp.291–296, B. I. Publication Pvt. Ltd.

9. R. Gopinath A. K. Nayak, A. Singh and D P Mishra, “New Features of NISA/3D Fluid (Incompressible)”, Proceedings of NISA User Conference, 1995.

10. D P Mishra, “Flame Propagation in Hydrogen, Oxygen, and Nitrogen”, Proceedings of 2nd International seminar on Fluid Mechanics and Heat Transfer (ICFMHT97), December 1997.

11. D P Mishra, “Numerical Studies of Fuel Lean Combustion”, Proceedings of 3rd International seminar on Fluid Mechanics and Heat Transfer (ICFMHT99), pp.367-373, 1999.

12. D P Mishra, “Numerical Studies of Stretched CH4-Air Cylindrical Premixed Flames”, Proceedings of 4th ISHMT/ASME Heat and Mass Transfer conference, pp.1093–1099, 2000.

13. A. Rahman and D P Mishra, “Experimental Study of Stability of Laminar Premixed LPG—Air Flame”, Proceedings of Recent Advances in Experimental Mechanics, pp.250, 2000.

14. D P Mishra, “Experimental Studies of Diffusion Flame Impingement Heat Transfer”, Proceedings of Recent Advances in Experimental Fluid Mechanics, pp255-262, 2000.

15. A. Rahman and D P Mishra, “Determination of Laminar Burning Velocity of Premixed LPG-Air Flames”, Proceedings of Recent Advances in Experimental Fluid Mechanics, pp. 255-262, 2000.

16. D P Mishra, “NOx Emissions of Gas Turbine Power Plant”, Proceedings of Energy Management Beyond 2000, pp. 203, 2000

17. D P Mishra, “Biomass Gasification Technology for Power Generation”, Proceedings of Energy Management Beyond 2000, pp.11 2, 2000

18. D P Mishra: “Rural Electrification by Biomass Gasification Technology”, Proceedings of All India Conference on Technologies for Rural Development”, pp.85, 2000.

19. D P Mishra and A. Rahman, “An Experimental Studies of Flammability Limits of LPG/Air Mixtures”, Proceedings of XVII National Conference on I.C. Engines and Combustion, Tata McGraw-Hill , pp. ,2001.

20. D P Mishra, “Effects of Initial Temperature on the Structure of Laminar CH4–Air Premixed Flame”, Proceedings of 5th ISHMT/ASME Heat and Mass Transfer conference, Tata McGraw-Hill , pp. 977, 2002.

21. D P Mishra and T Desai, “Numerical Study of Mixed Convection Heat Transfer from Thermal Sources on a Vertical Surface”, Proceedings of 5th ISHMT /ASME Heat and Mass Transfer conference, Tata McGraw-Hill, pp.478, 2002.

22. D P Mishra, “Experimental Studies of LPG–Air Premixed Flame Impingement Heat Transfer”, Proceedings of International Symposium on Recent Trends in Heat and Mass Transfer, 2002.

23. D P Mishra and D Mishra: “Heat Transfer between an Impinging Jet and Flat Plate, Proceeding of 6th National Conference on Air Breathing Engines and Aerospace Propulsion, 2003

24. D P Mishra, “Biomass Gasification Technology for Power Generation in Rural Areas”, Proceeding of 4th All India People’s Technology Congress, Kolkata, 2003.

25. D P Mishra, “Combustion, Air Pollution and Literature”, National seminar on literature, environment and indigenous knowledge systems, IIT, Kanpur, Jan. 2003

26. D P Mishra, “An Experimental Determination of stability Limits of CNG-Air Premixed Flame”, Proceeding of 18th National conference on IC engine and combustion, Trivandrum, Dec 2003.

27. D P Mishra, “Emissions Studies of Impinging Premixed Flame”, Proceeding of 18th National conference on IC engine and combustion, Trivandrum, Dec 2003.

28. D P Mishra and D. Mishra, “Enhancement of Heat Transfer to an Air Jet Impinging on a Flat Plate”, Proceedings of 2004 ASME Heat Transfer/Fluids Engineering Conference, HT-FED2004-56155, July 11-15, Charlotte, North Carolina, USA, 2004.

29. D P Mishra and Vishak T, “Computational Studies of Turbulent Flow in an Isothermal Suddenly Enlarged Combustion Chamber”, Proceedings of 2004 ASME Heat Transfer/Fluids Engineering Conference, HT-FED2004-56156, July 11-15, Charlotte, North Carolina, USA, 2004.

30. S. Nigam, D. Ahmed, A. Kushari and D P Mishra, “Re-circulating Flow Dynamics inside a Dump Combustor”, Proceedings of 7th National Conference on Air Breathing Engines and Aerospace Propulsion”, IIT, Kanpur, November 5-7, pp. 12-21, 2004.

31. D P Mishra and S. C. Nayak, “Control of NOx Emissions from Gaseous Fuel Base Combustors”, Proceedings of International Seminar on Gas Technology”, November 19-20, 2004.

32. S. S Panda, D P Mishra, and A. Upadhayay, “Combustion Synthesis of Nano-Silica Powder”, International Conference on Ceramic Processing 2004, Dec 22-25, 2004, BARC, Mumbai.

33. D P Mishra, S. C. Nayak and R. K. Ugandhar “Advances in Gas Fired Furnace Combustion Technology”, Proceedings of National Seminar on Combustion”, Allied Publisher, 2005.

34. R. N. Yadav, S. K. Jaiswal, D P Mishra, “Characterization of Ceramic Nanopowders produced from Combustion Method, National Conference on Advanced Characterization on Nanomaterials, 24-25th August, 2005.

35. D P Mishra, “Numerical Studies of Sudden Expansion Ramjet Combustor”, 19th National Convention of Aerospace Engineers, 2005.

36. S. S. Panda, D P Mishra, A. Upadhyaya, “Experimental Study of Synthesis and Sintering of Silica Nanopowders”, International Conference on Advanced Materials Design and Development, 2005.

37. A. Agrawal, N. S. Karan, D P Mishra, N. S. Gajbhiye, “Synthesis of the Titania Nanoparticles using LPG Diffusion Flame”, International Conference on Advanced Materials Design and Development, 2005.

38. R. N. Yadav, S. K. Jaiswala, S. S. Panda, D P Mishra, “Experimental Studies of Synthesis of Silica Nanopowders using LPG Diffusion Flame, 4th Asian Aerosol Conference, 2005.

39. S. S. Panda, D P Mishra, A. Upadhyaya, “Synthesis, Characterization and Sintering of Silica Nano-particles Using Diffusion Flame Reactor”, 4th Asian Aerosol Conference, 2005.

40. S. C. Nayak and D P Mishra, “Experimental Studies of Hydrogen Combustion in a Vortex Burner”, Proceedings of 19th National Conference on IC Engine and Combustion, Allied Publisher p. 301-305, 2005

41. A. Majee and D P Mishra, “Numerical Studies of Effect of Ambient Oxygen Concentration on Droplet Burning”, Proceedings of 19th National Conference on IC Engine and Combustion, Allied Publisher p. 321-325, 2005

42. D P Mishra and Kiran Kumar D. Y., “Experimental Investigation of the Bluff-body Stabilized Jet Diffusion Flames”, Proceedings of 19th National Conference on IC Engine and Combustion, Allied Publisher p. 283-288, 2005

43. D P Mishra and M. Maheswari, “An Experimental Study of Flame Spread over an Inclined Thin Fuel Surface”, Proceedings of 19th National Conference on IC Engine and Combustion, Allied Publisher p. 307-311, 2005

44. D P Mishra, “Internally Mixed Twin-Fluid Atomization”, Proceedings of 19th National Conference on IC Engine and Combustion, Allied Publisher, p. 313-320, 2005.

45. S. S. Panda D P Mishra and A. Upadhyaya , “Synthesis of Silica-nano Powders Using Diffusion Flame Reactor”, Proceedings of 19th National Conference on IC Engine and Combustion, Allied Publisher p. 351-355, 2005

46. K. U. Reddy and D P Mishra, “Effect of Injection Pressure and GLR on Spray Characteristics of an Internally Mixed Twin Fluid Atomizer”, Proceedings of 19th National Conference on IC Engine and Combustion, Allied Publisher p. 357-361, 2005.

47. A. Yoshida, A. Naito and D P Mishra, “Structure of Distributed Reaction Zone in a well-stirred Reactor”, Proceedings of 19th National Conference on IC Engine and Combustion, Allied Publisher p. 391-398, 2005.

48. D P Mishra, “Effect of Nozzle Geometry of Turbulent Jet on the Impingement Heat Transfer to a Flat Plate”, 18th National & 7th ISHMT/ASME Heat and Mass, January 2006.

49. D P Mishra, and Anurag Verma “Study of Downward smoldering Combustion in Polyurethane Foams”, 18th National & 7th ISHMT/ASME Heat and Mass, January 2006.

50. D P Mishra, and S. C. Nayak “Experimental Studies of Low Emission Vortex Burner”, 18th National & 7th ISHMT/ASME Heat and Mass, January 2006.

51. D P Mishra and K. Ugandhar Reddy, “Investigation On Spray Behavior In the Transition Regime Of A Pressure Swirl Atomizer”, ICLASS 2006, Aug.27-Sept.1, 2006, Kyoto, Japan.

52. D P Mishra and S. Kuchibhatla, “Numerical Studies of a Novel Vortex Combustor, National Conference on CFD Applications in Power and Industry Sectors. 17th-18th November 2006.

53. D P Mishra, “Stability and Emission in a Co-axial Swirl Partially Premixed Flame Burner”, Proceedings of 8th National Conference on Air Breathing Engines and Aerospace Propulsion, p. 535-545, 2006

54. D. Y. Kiran and D P Mishra, “Experimental Studies of Bluff Body Stabilized LPG Jet Diffusion Flames”, Proceedings of 8th National Conference on Air Breathing Engines and Aerospace Propulsion, p. 525-534, 2006

55. N Goyal and D P Mishra, “Experimental Study of Internally Mixed Twin-Fluid Liquid Atomizer”, Proceedings of 8th National Conference on Air Breathing Engines and Aerospace Propulsion, p. 329-335, 2006.

56. P Kumar and D P Mishra, “Experimental Study of Dilution Effect on Laminar Diffusion Flame”, Proceedings of 8th National Conference on Air Breathing Engines and Aerospace Propulsion, p. 553-561, 2006.

57. D P Mishra and A. Majee, “Numerical Studies of Combustion of a Single n-Heptane Droplet” , Proceedings of 8th National Conference on Air Breathing Engines and Aerospace Propulsion, p. 562-571, 2006.

58. D P Mishra and Neelaksh Goyal, “Experimental Study of LPG Diffusion Flame Suppression by Water Mist”, 5th International Seminar on Fire and Explosion Hazards, Edinburgh, UK, 2007.

59. D P Mishra and Sridhar K. V, “Fuel Injection And Flame Stabilization In a Supersonic Combustor” Proceedings of International Conference in High Speed Trans-atmospheric Air & Space Transportation, p 344-355, 29-30th June 2007.

60. D P Mishra and S. Mahesh “Experimental Study of LPG Turbulent Inverse Diffusion Flame in Coaxial Burner” Proceeding of the International Conference on IC Engine and Combustion, Page No.43-51, 2007.

61. D P Mishra and P. Kumar “Experimental Investigation of LPG-H2 Jet Diffusion Flame” Proceeding of the International Conference on IC Engine and Combustion, Page No.494-501, 2007.

62. D P Mishra and R. Singh “Effect of Preheated Air on the Structure of Coaxial Jet Diffusion Flame” Proceeding of the International Conference on IC Engine and Combustion, Page No.502-506, 2007.

63. D P Mishra and Vivek Joshi “Low Injection Pressure Spray Characterization of Swirl Co-Axial Atomizer” Proceedings 21st National Convention of Aerospace Engineers Page.No.TP153-TP164, 2007.

64. D P Mishra and P.Kumar “Experimental Investigation of Laminar Jet Diffusion Flame” Proceedings 21st National Convention of Aerospace Engineers Page No.TP196-TP210, 2007

65. D P Mishra and S. Mahesh “Experimental Study of Inverse Diffusion Flame”, Proceedings 21st National Convention of Aerospace Engineers Page No.TP 221-TP 234, 2007.

66. D P Mishra and K. V. Sridhar , “Numerical Study of Cavity Based Fuel Injection under Supersonic Flow Conditions“, Proceedings of the Second International Symposium on Recent Advances in Experimental Fluid Mechanics, Page 477-486, 2008.

67. D P Mishra and Swarup Y Yejurkar, “Thermal Analysis of Flow Over Train in a Tunnel, Proceedings of the Second International Symposium on Recent Advances in Experimental Fluid Mechanics, Page 409-419, 2008

68. D P Mishra and R. Sudharsan, “Numerical Study of Subsonic Flow in Oppositely Placed Cavities Externally Placed in a rectangular duct“, Proceedings of the Second International Symposium on Recent Advances in Experimental Fluid Mechanics, Page 468-477, 2008.

69. Reddy K U and D P Mishra, “Flow Structure and Mixing Characteristics of Turbulent Confined Swirling Flows”, International Conference on Advances in Mechanical Engineering, 2nd-4th July 2008.

70. S. Y. Jejurkar and D P Mishra, “Numerical Studies On Premixed Flame Based Novel Annular Microcombustor”, 9th Asia-Pacific International Symposium on Combustion and Energy Utilization, 2nd -6th November 2008.

71. D P Mishra and R. Sudharsan, , 9th Asia-Pacific International Symposium on Combustion and Energy Utilization, 2nd -6th November 2008.

72. G. Rukmangadhan G. and D P Mishra, “Experimental Investigation of Droplet Combustion at Atmospheric and High Pressure”, 22nd National Convention of Aerospace Engineers, Birla Institute of Technology, Mesra, 2008.

73. D P Mishra and G Singh, “Characterization of Spray of Internal Mixing Atomizer” Proceedings of IISc International Conference and Exhibition on Aerospace Engineering, Banaglore, pp.333-338, 2009.

74. D P Mishra and G Singh, “Numerical Investigation of Direct Fuel Injection from the Cavity Walls in 2D Supersonic Combustor”, Proceedings of IISc International Conference and Exhibition on Aerospace Engineering, Bangalore, pp.393-401 2009.

75. D P Mishra and R. Singh, “Study of Water Mist System for Fire Suppression”, 7th Asia-Pacific Conference on Combustion, National Taiwan University, Taiwan, 24-27 May 2009.

76. S. Y. Jejurkar and D P Mishra, “Characteristics of Premixed Flame in an Annular Micro-combustor”, 7th Asia-Pacific Conference on Combustion, National Taiwan University, Taiwan, 24-27 May 2009.

77. R. Sudharshan, P. K. Ezhil Kumar and D P Mishra, “Numerical Studies of a 2D Trapped Vortex Combustor” 7th Asia-Pacific Conference on Combustion, National Taiwan University, Taiwan, 24-27 May 2009.

78. Mahesh S. and D P Mishra, “Characterization of Turbulent LPG Inverse Diffusion Flame in Recessed Back step and Coaxial Burners” 7th Asia-Pacific Conference on Combustion, National Taiwan University, Taiwan, 24-27 May 2009.

79. B.V.S. Jyoti, M. Muralidhar and D P Mishra, “Experimental Study of CNG-Air Premixed Flames using Chemiluminescence Sensor” 7th Asia-Pacific Conference on Combustion, National Taiwan University, Taiwan, 24-27 May 2009.

80. D P Mishra and A Patyal , “Effects of Initial Droplet Diameter and Pressure on Burning of Organic Gellant-Based Fuel Droplets“, Proceedings of 21st National Conference on IC Engine and Combustion, p. 477-486, 2009.

81. M Muralidhar, P K Ezhil and D P Mishra, “Characterization of twin fluid atomizer spray using an optical patternation technique”, Proceedings of 21st National Conference on IC Engine and Combustion, p. 477-486, 2009.

82. P K Ezhil and D P Mishra, “Numerical modeling of an axisymmetric trapped vortex combustor”, Proceedings of 21st National Conference on IC Engine and Combustion, p. 477-486, 2009.

83. D P Mishra, and K V Sridhar “Numerical Study of the Effect of Fuel Injection Angle in a Directly Fuelled 2D Supersonic Cavity Combustor”, Proceedings of 21st National Conference on IC Engine and Combustion, p. 477-486, 2009.

84. D P Mishra and J Vivek C, “Spray Characterization of a Dual mode Internally Mixed Swirl Co-axial Atomizer, Proceedings of 10th Asian Symposium on Visualization, p. 477-486, 2010.

85. P K Ezhil Kumar and D P Mishra, “Effect of Momentum Ratio on Non-reacting structure in an Axisymmetric Trapped Vortex Combustor, Proceedings of 10th Asian Symposium on Visualization, p. 477-486, 2010.

86. D P Mishra and  Vivek J C, “Spray Characterization of a Dual mode Internally Mixed Swirl Co-axial Atomizer, Proceedings of 10th  Asian Symposium on Visualization, p.  709-719, 2010.

87. D P Mishra and  Vivek J C, “Spray Characterization of a Dual mode Internally Mixed Swirl Co-axial Atomizer, Proceedings of ILLASS,  2010.

88. P K Ezhil Kumar and D P Mishra, “Effects of Heat Release on Flow Structure in an Axisymmetric Trapped Vortex Combustor”, Proceedings of 8th Asia-Pacific Conference on Combustion, Hyderabad, 2010.

89. Jejurkar S and D P Mishra, “Effects of Wall Thermal Conductivity on the Second Law Performance of a Hydrogen-Air Premixed Flame Annular Microcombustor”, Proceedings of 8th Asia-Pacific Conference on Combustion, Hyderabad, 2010.

90. P K Ezhil Kumar and D P Mishra, “Effects of Heat Release on Flow Structure in an Axisymmetric Trapped Vortex Combustor”, Proceedings of 8th Asia-Pacific Conference on Combustion, Hyderabad, 2010.

91. P. K. Ezhil Kumar and D. P. Mishra, “Effect of Injection Strategies on Flame Length in a 2D Trapped Vortex Combustor” Proceedings of 11th Asian Symposium on Visualization, Niigata, Japan, 5-9 June 2011.

92. Jejurkar SY, Mishra DP. Second law analysis of a premixed flame based annular microcombustor. 5th European Combustion Meeting 28 June–1 July 2011, Cardiff University, Cardiff, UK.

93. Jejurkar SY, Mishra DP. On the structure of lean premixed H2–air flames in an annular microcombustor. 7th International Seminar on Flame Structure 11–15 July 2011, Novosibirsk, Russia.

Technical Reports
    1. D. P. Mishra,  “Design and Development of A Burner  for Producer Gas”, Submitted to the Tata Energy Research Institute, New Delhi, Report No: AE/DPM/TERI/97/1, 1997.
    1. D. P. Mishra,  “Experimental and Computational Studies of Natural Gas-Air Premixed Flame ”, Submitted to the DST, New Delhi,  Report No:  DST-PP-TR-2002-1, 2002
    1. D. P. Mishra,  “ An Experimental Study  of Flame Impingement Heat Transfer”, Submitted to the CSIR, New Delhi,  Report No:  CSIR-PP-TR-2002-2, 2002
    1. D. P. Mishra,  “An Experimental Study of Turbulent Premixed Coaxial Jet Flame Burner”, Submitted to the ARDB, New Delhi,  Report No:  ARDB-PP-TR-2002-2, 2004
    1. D. P. Mishra, “An Experimental Study of  Low Emission Energy Efficient Burner” Submitted to the MHRD, New Delhi,  Report No:  MHRD-PP-TR-2003-1, 2005
    1. A. Kushari and D. P. Mishra,“ Study of Liquid Fuel Combustion in a Re-Circulating Flow Field of Gaseous Oxidizer” Submitted to the ISRO-IITK Space Technology Cell,  2005
    1. D. P. Mishra,“ Design and Development of LPG Commercial  Burner ” PCRA,  New Delhi, 2007.
    1. D. P. Mishra,“ Experimental Study of Coaxial Internally Mixed Atomizer” Submitted to the ISRO-IITK Space Technology Cell,  2008.
    1. D. P. Mishra,“ Experimental Study of Water Mist System for Fire Suppression” Submitted to the CSIR,  New Delhi, 2008.
    1. D. P. Mishra, and A Uppadhya, “Flame Synthesis of Silica Nanopowders” Submitted to the ARDB,  New Delhi, 2009.
    1. D. P. Mishra, “Experimental Study of Aerated Liquid Injection into Subsonic Flow” Submitted to the ARDB,  New Delhi, 2010.
    1. D. P. Mishra, “Experimental Study of Liquid Fuel Combustion using Chemiluminescence Sensor” Submitted to the DRDO,  New Delhi, 2010.
    1. D. P. Mishra, “Numerical and Experimental Study Droplet Combustion under Normal and Microgravity Conditions” Submitted to the ISRO,  Bangalore, 2010.
Text Books
    • D. P. Mishra, Fundamentals  of Combustion, Prentice Hall of India, New Delhi, revised edition, 2010.
    • D. P. Mishra, Gas Turbine Propulsion, Annamaya  Publisher, New Delhi 2011
    • D. P. Mishra, Engineering Thermodynamics, Cengage Learning India Pvt. Ltd, 2011
    • D P Mishra, Experiments in Combustion, (under preparation).
  •  D P Mishra, “Rocket Propulsion”, (under preparation).
Edited Books / Proceedings
    • D. P. Mishra and V K Reddy, Proceedings of 8th Asia  Pacific Conference on Combustion, 10-13th December 2010, Hyderabad, India.
    • A. K. Ghosh and D. P. Mishra, “Proceedings of 21st National Convention of Aerospace Engineers”, 16-17th Nov 2007, IIT, Kanpur, India.
    • D. P. Mishra, “Proceedings of National Seminar on Combustion”, Allied Publisher, 2005.
    • D. P. Mishra,  Proceedings of Short Term Course “Applied Combustion”, 2005.
    • D. P. Mishra,  Proceedings of Short Term Course “Combustion Generated emission & its control”, 2004
  • D. P. Mishra and Mukesh Sharma,  Proceedings of short term course “Air Pollution & its Control”, 2002
Awards and Honors
Young Scientist Award, Ministry of Nonconventional Energy Sources, 1991.Excellent Tutor Reorganization, for the course “Thermodynamics” (ESO102) at IIT Kanpur, 2000

INSA-JSPS Fellowship, 2002

Vijay Shree Award , 2005

Associate Editor, Journal of Natural Gas Science and engineering, Elsevier Publisher, USA, 2008

Aerospace Engineering Division Prize, by the Institute of Engineers (India), Kolkata, India, 2008

Sir Rajendranath Mookerjee Memorial Prize by the Institute of Engineers (India), Kolkata, India, 2008

Editorial board member, Recent Patents on Engineering, Bentham Science Publishers Ltd. 2008

Asst. Editor, International Journal of Hydrogen Energy, Elsevier Publisher, USA, 2009.

Samanta Chandra Sekhar Award, 2009.

Editor, 8th Asia-Pacific Conference on Combustion, 2010

Vikasa Prerak Award,  2010.

Member,  National Organizing Committee, CHEMCON-2011.

Editorial board member, Journal of the Chinese Institute of Engineers, Published by Taylor&Francis, 2011

Editorial board member, International Journal for Turbines and Energy, 2011.

Member, National Technical Committee, National conference onEnergy, Economy and Environment”,  from 28th to 30th December, 2011.

Editorial Board Member, International Journal for Turbo and Jet Engines, Published by De Gruyter, Germany, 2011.

 

 

Dr. J Ramkumar

Untitled

 

 

 

 

Dr. J. Ramkumar (Associate Professor)
Department of Mechanical Engineering

RESEARCH INTERESTS

Micro/Nano Manufacturing & Machining

Composites

Latest  Updates

Profile Detail

Dr H C Verma

HCV

 

 

 

 

 

 

Dr. Harish Chandra Verma joined the Department in 1994.  He obtained his doctoral degree at the Indian Institute of Technology (I.I.T.) Kanpur,  working under the supervision of Prof.  G.N. Rao. Subsequently he worked as Lecturer and then  Reader at Patna University, India.

He is an Nuclear Experimental  physicist, whose chief interest lies in Condensed Matter and Materials Applications. Currently,  he is working on Nanocrystalline Magnetic Materials and Alloys Systems.  Dr. Verma is also interested in Earth Science problems such as meteorites and extinction boundaries. He has authored several books including Concepts of Physics at introductory college level and Quantum Physics at collerge level. He is presently working on a book on Electromechanics.

More details can be found in his laboratory home page.

Detail Profile on wikipedia

Dr H C Verma Webpage

Prof. G S Bhargava

IMG-20150506-WA0003 (2)

 

 

 

 

 

 

 

 

 

 

College name:  RETIRED PRINCIPAL, GOVERNMENT CENTRAL TEXTILE INSTITUTE

Department: TEXTILES

Faculty name:  GYANESHWAR SAHAI BHARGAVA

Father’s name: Mr.HARDEV SAHAI BHARGAVA

Mother’s name: KANTI BHARGAVA

Marital status: Married

Date of birth (DD/MM/YYYY): 01/07/1939

Gender: Male

Religion: Hindu

Category: GEN

Designation: RETIRED PRINCIPAL, GOVERNMENT CENTRAL TEXTILE INSTITUTE

Highest educational qualification: M.Sc. (Maths) & M.Tech (Textiles)

Teaching Experience in years: 27 years

Number of Ph. D. Students:    5  Awarded

Publication: 27

Subject :  TEXTILES

Industrial experience in years: 07

Mobile number: 9335830283

Email: bhargavagsb@gmail.com

Correspondence address: 117/K/21A, R.S. PURAM, KAKADEV, KANPUR

High school Roll No. (Passing Year):  25887 (1953)

PAN Number: AGQPB2540Q

 

Date of Joining: 17.12.1983 as Principal Government Central Textile Institute

 

Dr. A K Singhal

AksDr. A.K. Singhal

Dr Anil K. Singhal passed his B.Tech (Agriculture Engineering) from  G.B. Pant University of Agriculture and Technology, Pantnagar ,District Nainital (Uttarakhand) in March 1975 and M.Tech (Mechanical Engineering-Process Equipment Design) in 22 August 1987. He did his Ph.D. from Gautam Buddh Technical University in Mechanical Engineering in the year 2013 (29 June 2013). He has more than 37 years of teaching, research and industrial experience

Research work carried out on various aspects of the machines of seed processing plant and their related indigenous substitute for their parts and modifications needed at seed processing plant , C.S.Azad University of Agriculture and Technology.

Guided in developing new hand operated/motor operated pulp cum juicer  used in agricultural biochemistry for extracting the juice for making dry protein powder from the BERSEAM during the tenure of Mr. G.P. Srivastava, Prof. and Head Department of Agricultural Biochemistry.

Developed a urea super granule paddy dispenser (implement) which is recognized by the then vice-chancellor Dr. S.S.Ahmad (Retired I.A.S, A.P.C).

During working with B.Tech Agriculture engineering students for there project developed a eco friendly, low cost exhaust silencer for vikram tempo used in cities for passenger transport.

Developed the technology, ”BUTT joining of similar and dissimilar pipe material by cold joining process.”  During his Ph.D. work under the guidance of the Dr J. Ramkumar, Prof,Mechanical Department, IIT Kanpur and Dr. R.K.Singh Scientist ,DMSRDE(Defence Laboratory,DRDO),Kanpur.

Courses Designed and Taught

[1] For B.Tech (Agriculture Engineering.)

  • Agro Industrial Processing – 4(3-0-2)
  • Farm Equipment Design – 2(2-2-0)
  • Humanities II – 2(2-0-0) – 2(2-0-0)
  • Numerical methods and Computer Programming – 3(2-0-2)
  • Principle of Electrical Engineering – 3(2-1-2)
  • Engineering Graphics I – 2(1-0-3)
  • Engineering Graphics II – 2(1-0-3)
  • Engineering Mechanics – 3(2-1-2)
  • Entrepreneurship – 2(2-0-0)
  • Project I and Project II – 8(0-0-16)
  • Seminar – 1
  • Farm Power – 4(3-0-2)
  • Workshop Practice I & II – 3(1-0-2)

 

[2] For M.Sc. (Home Science) Family Resource Management.

  • Time and Energy Technology in Household – 4(2+2)
  • Advanced Household equipments – 4(2+2)
  • Activity Analysis and Ergonomics – 3(2+1) Related to Mechanical Engineering
  • Ergonomics and Body Mechanics – 3(2+1) Related to Mechanical Engineering
  • Ergonomically Designed Workstation – 3(2+1) Related to Mechanical Engineering

[3] For PhD (Home Science) Family Resource Management.

  • Ergonomics in the Home – 2(1+1)
  • Environment and Safety management – 2(1+1)- Related to safety Engineering Subjects

[4] For B.Sc (Home Science)

  • Fitting and Fixtures – 2(1+1) ) Related to Mechanical Engineering
  • Elementary Physics.

[5]  For B.Sc (Forestry)

  • Wood Science and Technology – 3(2+1) Related to Engineering Workshop
  • Forest Menstruation – 3(2+1)

[6] For M.Sc (Seed Technology)

  • Seed Processing (Machinery) – 2 (1.5+0.5) Old – Engineering related to the Machines
  • Seed Processing and Storage – 3(2+1) New – Environmental Control and Construction of building related to Refrigeration and air conditioning and civil engineering.

[7] For B.Sc (Agriculture and Animal Husbandry)

  • Agriculture Engineering I – 4(2+2)
  • Agriculture Engineering II – 4(2+2)
  • Farm Machinery and Power – 2(1+1) related to Tractors, Diesel Engines ,earth movers etc
  • Post harvest Engineering – 2(1+1) Related to combine Harvester and other machinery.
  • Farm structure – 3(2+1) Related to civil engineering and mechanical engineering.
  • Protected Agriculture and Post Harvest Technology – 3(2+1) Related to mechanical engineering , Air Conditioning and refrigeration and plastic Engineering etc with Agriculture Production.

Projects :- A project on “Operational Research and demonstration of renewable energy gadgets among rural women has been sanctioned and funded by Indian Council of Agriculture Research, New Delhi during the year 2000, He has worked in this project as Co-principle investigator ,Project is already completed successfully”.

Thesis Guided

PhD Thesis : As Co Guide/ Co- Advisor.

  • An Ergonomic Assessment :Gender  differentiation performing selected Dairy farming Activities in Kanpur Nagar (U.P)-2008
  • Ergonomic evaluation of selected kitchen equipments in Urban households of Kanpur Nagar (U.P) -2007
  • Assessments of musculoskeletal disorder among building construction workers -2010
  • An ergonomic approach: Textile workers in noise emitting industry of Kanpur (U.P)-2010 (Study place Lal Imli factory,Kanpur)
  • Assessment of Grip Strength of selected activities among leather industry workers – 2010

M.Sc Thesis :-  As Co-guide/Co-Advisor

  • Comparative study on Solar Cooker and its acceptance by women in Agra City -1999
  • Traffic pattern and functionality of urban kitchen in Gaziabad City (U.P)
  • Suitability of study table and chair for physically handicapped college going girls -2007
  • Musculoskeletal discomfort related to school bag carriage of secondary school students -2007
  • Differential use of kitchen equipment and labor saving devices in Kanpur district -2009
  • An Ergonomical Study on work assessment of sewing machine operators in Kanpur Nagar (U.P) -2012
  • Postural Stress among chicken kari workers in district Lucknow -2012
  • Ergonomics Assessment of brick manufacturing workers in district Ambedkar Nagar (U.P)
  • Ergonomics assessment of furniture making carpenters in Kanpur Nagar (U.P)
  • Development of low cost eco friendly sanitary napkins incorporated herbal and microbial finish -2013
  • Influence of pectiholytic enzyme on Flax retting-2013

 M.Sc Thesis Guide/Chairperson

  • Design and development of a hand supporting device for partially handicapped bounded with chair -2000
  • Consumer preference for purchase of perfumed soap in Kanpur Nagar (U.P)-2012 [Formulation from forest products.]
  • Study of Parthenium for the benefit of mankind in Kanpur Nagar -2013 [developed a composite sheet(Board) and two types of insecticides formulations]

BTech (Agriculture Engineering)Project- Guide/Chairperson

  • Design and development and testing of wheel chair with computer operation supporting device -1999 [device developed for the use of handicapped student(architecture engineering) of polytechnic for handicapped, Kanpur]
  • Design, development and testing of an eco friendly exhaust silencer for Vikram tempo-2000 [developed for the tempo and tested after installation in the tempo] 

Developmental Work during Stud

B.Tech. Project

“Design , development and testing of a continuous soybean seed treater  ”[Full scale working model]

Remark:- The first cost of the treater developed was founed to be RS 3015.44 against Rs 45,000 of the existing one’s (Imported from U.S.A). Imported machine for soybean seed treatment can be replaced by the said continuous soybean seed treater which can cause saving of foreign exchange and initial cost there to. This technology was released by ICAR, New Delhi for manufacturing to various industries.

M.Tech. Thesis

“A study of reciprocity type paddy cleaner”

[Theoretical formulation developed and verified with the actual machine parameters]

 Remark: The formulation can be used for design of equipment used for separating the granular agricultural products. This can also be used for separating other chemical materials like coal, nut and bolts etc.in different industries.

Ph.D. Thesis

Investigation into mechanical behavior of FRP joining of pipes.

Remark:-  This technology can be used for CNG,LPG gas lines as well as pipe lines of other chemicals. 

International Publications:

[1]  J.Ramkumar, A.K.Singhal, Ritesh Kumar Singh and Prashant Kumar, (2007). Butt joining of similar and dissimilar pipe material by cold joining process. Advance composite letters, Vol 16, Issue 5 ,173-179.

[2] A.K.Singhal, Rashmi R.Devi, Vivek Kumar, J Ramkumar and R.K.Singh (2010). XNBR toughened epoxyglass fabric composites: An evaluation of their static and dynamic mechanical properties , Journal of  Polymer Materials: An International Journal, Vol 27 , Issue (2),97-112

[3]  A.K.Singhal, Vivek Kumar, J. Ramkumar, R.K.Singh, S.K.Malhotra (2010). Experimental investigation of mechanical and tribological performance of XNBR rubber modified epoxy under dry sliding condition. International Journal of Plastic Technology. Vol. 14 ,Issue(1),1-11.

Other Publications/presentation in conferences/Seminars

[1] Singhal A.K., Singh K.P and Kachhara N.L.(1987) Design of modern Rice Mill Plant. National Seminar on “The role of improved Seeds, Implements, Fertilizers, Pesticides and marketing on Agricultural and Rural development” held on April 17&18 at HBTI, Kanpur

[2]  Singhal A.K. (1995) Harnesses of developing countries. National Conference on “Animal Energy” held on   March 6&7 at Center for Development of Rural Technology (C.D.R.T.) Allahabad (U.P) .

[3] Singhal A.K. and Rathi K..S (1997) A critical Appraisal of enrgy used in Agricultural Sector. Seminar held on 27th May on “Conservation of Petroleum Products in Agriculture Sector” organized by Petroleum Conservation Research Association Northern Region 609 New Delhi and CSA University of Agriculture and Technology Kanpur

[4] Dayal Rekha, Srivastava Rashmi and Singhal A.K. (1998) Future research needs on solar energy. A National seminar on “Solar energy and Power generation” held on 20 & 21st May organized by Non Conventional Energy Research, Development and Training Centre(A U.P. Govt. organization ) ,Deva Road, Chinhat, Lucknow-227105.

[5] Singhal A.K. ,Khan A.A. and Bhattacharya (August-2002), Thermoplastic v/s Thermosetting Structural Composites, An International Journal of progressive Agriculture. Vol 2, No2.

[6] Singhal A.K., Tripathi R.Y.and Kumar Sarvesh (2003) Utilization of  fast growing small diameter-trees and bamboos and related engineering technology-a review. A National seminar on “Forest Resource management” November 15-17, Organized by Department of forestry C.S.Azad University of Agriculture and Technology Kanpur.

[7] Singhal A.K., Verma Prasoon and Lal R.R. (2005) Mechanized Pulse Production-A status report. Organized by Department of Agriculture biochemistry, C.S Azad university of agriculture and technology Kanpur.

[8] Khan A.A. ,Bajpai V.P, Kanaujia V.P, Sachan C.P and Singhal A.K. (2003) Effect of showing date and spacing on seed of Okra. Presented in “National Symposium on resource management for eco friendly crop production” held on Feb 26-28 at C.S.Azad University of Agriculture and Technology, Kanpur.

[9] Kumar Vivek, Singhal A.K.  and Ramkumar J.(2009) Mechanical and Tribological behavior of glass epoxy composites modified using XNBR elastomer. Presented at “Tribo-INDIA conference” held on December 11th-12th at IIT, New Delhi.

[10] Gupta Richa and Singhal A.K. (2012) Study of homemade perfumed soap using forest by products. Proceeding of the national seminar on production, utilization and marketing of tree, oil seeds Vol II. A National Seminar held on October 4th -5th at department of Agronomy, Agricultural College and Research Institute, Tamil Nadu Agricultural University, Madurai, Tamil Nadu, Sponsored by NOVOD Board.     

 

Participation in Seminar/Symposium/Workshops/Conferences etc.

[1] National Seminar on “Current studies of Agro-based technologies and futuristic approach to rapid rural Industrialization” held on February 7-9th  at A.N.D University of Agriculture and Technology ,Kumarganj, Faizabad.

[2] National seminar on 50 years of Independence and national environment. Co-Sponsored by C.S.J.M University Kanpur and A.I.C.T.E., New Delhi. Held on May 30th 1998 at senate hall C.S.J.M University, Kanpur.

[3]  The seminar cum workshop on farming system approach held on November 29th-30th 1999. organized by Directorate of Research, C.S.Azad University of Agriculture and Technology Kanpur.

[4]  International symposium on “Agricultural education in the next century : Lessons learnt and prospects under the world bank support AHRD Project ” held on December 9th-11th 1999 at Vigyan Bhavan, New Delhi organized by Indian Council of Agricultural Research, Krishi Anusandhan Bhavan, New Delhi and World Bank.

[5] Action Group meeting in Agriculture Sector on “Conservation of petroleum products” held on  November 3 2000. Sponsored by Oil industry UP and Petroleum conservation Research Association Sub Regional Office, Lucknow.

[6] Role of Information Technology held on February 19th-20th 2001. Directorate of Agricultre experiment station C.S.Azad university of Agriculture and Technology, Kanpur .

[7] Seminar on Agri Business held on March 26th-28th, 2001 Directorate of Agricultre experiment station ,C.S.Azad University of Agriculture and Technology Kanpur.

[8] National Symposium on “Technological Innovations for Resource starved farmers in global perspective” held on April 28th-30th , 2008  organized under the joined auspicious of the society of agricultural professionals CSAUAT Kanpur and C.S.Azad university of Agriculture and Technology, Kanpur.

[9] National Symposium on Biodiversity and food security-challenges and devising strategies held on December 10th-11th,2011 organized by Dheerpura Society for Advancement of Science and Rural Development and Indian Institute of Pulses Research, Kanpur(ICAR). Co-sponsered by Uttarakhand Seed and Tarai Development Corporation limited, Uttarakhand and biotechnology research foundation (BRF) Kanpur.

[10] Workshop on Micro and Nano Manufacturing held on February 27th-2nd March 2012 held at Mechanical Engineering Department and Physics Department, IIT Kanpur.

Award and Distinction received

[1] Rs. 200/- as Cash prize on the paper “Harnesses of Developing Countries” has honored in the National Conference on Animal Energy by the Non Conventional Energy Department, New Delhi at Allahabad.

Participation in Refersher courses/Summer Institutes.

[1] Training on Power Tillers used for farming commenced 15.10.1974 (60 days) held at J.K.Satoh Factory (J.K. Organization),Rania industrial estate Kanpur.

[2] Training and orientation course on seed processing and storage engineering, commenced from 2nd November 1981(13 days) held at National seed Cororation Lmited,  Beej BHavan ,Pusa Complex ,New Delhi.

[3] Training on Crop Driers (Furnace OIL Fired) commenced from 14th December 1982 (6 days) held at Thermex India limited /Wanson (India) Ltd,Chinchawad Pune, Sponsored by Govt. OF India under ICAR System New Delhi.

[4] Transfer of technology for income and employment generation Agro-based processing industries for rural development commenced from 14th May 1990 (20 days). Sponsored by ICAR New Delhi, held at Central Institute of Agricultural Engineering, Bhopal.

[5] Computer training for Aris personnel Sponsored by ICAR New Delhi, held at IASRI, New Delhi.

[6] Operation of Sun Solarx UNIX server(Computer operation) commenced June 8th 1998 , Sponsored by ICAR New Delhi held at IISR, Lucknow.

[7] Advanced training on Agro Forestry commenced October 28th 1999 (2 days) organized by Director AES, CSAUA&T Kanpur and UP Diversified Support project and UPCAR, Lucknow.

[8] Advances in Dry land agriculture Research commenced from 26th August 1999(3 Days) organized by Department of Agronomy, CSAUA&T Kanpur and UP Diversified Support project and UPCAR, Lucknow.

[9] Training on Post Harvest technology-Agro Processing and value addition ,commence from 4th -5th 2003 and held at C.S.Azad university of Agriculture and Technology, Kanpur.

[10] Training on Plantation Techniques of Jatropha and Karanja and their use as Bio-Fuel commencing on February 28th 2004 (2 days) sponsored by NOVOD Board, Gurgaon Haryana and Forestry Department held at C.S.Azad university of Agriculture and Technology, Kanpur.

[11] Recent Trends in Advanced Composites, commenced from Oct 10th 2005(5 Days) held at Department of Mechanical Engineering ,IIT, Kanpur.

[12] Training on production technology, post harvesting, processing ,value addition and marketing of medicinal and aromatic plants, commence from march 28th 2006 (2 days) sponsored by National Medicinal Plant Board, New Delhi held at C.S.Azad university of Agriculture and Technology, Kanpur.

Extension and Outreach Field Activities

 Worked as trainer 

[1] Training program for the care and maintenance of the gobar gas plant and its advantages, organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on January 5th 1997 at Bidhunu, Kanpur

[2] The proper use of the seed drill organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on January 5th 1997 at Bidhunu, Kanpur

[3] The use of sprinkler irrigation and drip irrigation methods under Uslar land conditions organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on March 23rd  1997 at Bidhunu, Kanpur.

[4] The use of sprinkler irrigation and drip irrigation methods under Uslar land conditions organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on April 13th 1997 at Patara , Kanpur.

[5] The use of sprinkler irrigation and drip irrigation methods under Uslar land conditions organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on May 10th-11th 1997 at Shivrajpur , Kanpur.

[6] Training program for the care and maintenance of the gobar gas plant and its advantages, organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on November 30th 1997 at Patara, Kanpur

[7] Training program for the care and maintenance of the gobar gas plant and its advantages, organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on December 14th 1997 at Bhitargaon, Kanpur.

[8] Training program for the care and maintenance of the gobar gas plant and its advantages, organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on January 4th 1998 at Shivrajpur, Kanpur

[9] The efficient use of single bullock harness and its manufacturing organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on April 11th 1998 at Amaraudha, Kanpur Dehat.

[10] The proper use of the seed drill organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on April 12th 1998 at Patara, Kanpur

[11] The efficient use of single bullock harness and its manufacturing organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on May 9th-10th 1998 at Sarsaul, Kanpur.

[12] The efficient use of single bullock harness and its manufacturing organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on June 13th-14th 1998 at Bidhunu, Kanpur.

[13] The use of sprinkler irrigation and drip irrigation methods under Uslar land conditions organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on November 14th-15th 1998 at Shivrajpur , Kanpur.

[14] The maintainece and care of Hand Pumps (INDIA mark II) and its installation  organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on April 10th-11th 1999 at Amraudha, Kanpur Dehat.

[15] The proper use of seed drill organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on April 18th 1999 at Ghatampur, Kanpur.

[16] The maintainece and care of Hand Pumps (INDIA mark II) and its installation  organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on May 8th-9th 1999 at Maitha, Kanpur Dehat.

[17] The proper use of seed drill organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on May 23rd 1999 at Shivrajpur, Kanpur.

[18] The proper use of seed drill organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on June 12th-13th 1999 at Rasulabad, Kanpur Dehat.

[19] The food storage bins in world food day program organized by College of Home Science on October 15th -16th 1999 at CSAU, Kanpur.

[20] The maintainece and care of Hand Pumps (INDIA mark II) and its installation  organized by Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on November 13th-14th 1999 at Sarsaul, Kanpur.

[21] Four days workshop on “Use of solar energy in rural areas” organized by College of Home Science on November 12th-15th 1999 at CSAU, Kanpur.

[22] The new methods of zero tillage farming system and raised bed farming system organized by  Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on February 12th 2000 at Bidhunu, Kanpur.

[23] The new methods of zero tillage farming system and raised bed farming system organized by  Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on March 3rd 2000 at Sarsaul, Kanpur.

[24] The new methods of zero tillage farming system and raised bed farming system organized by  Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on March 12th 2000 at Ghatampur, Kanpur.

[25] 3 days workshop on “Empowerment of Rural women of 21st Century in India” organized by College of Home Science on March 23rd 2000.

[26] The new methods of zero tillage farming system and raised bed farming system organized by  Paryavaran Sanrakshan Sansthan (NGO) , 753 Awadhpuri on April 2nd 2000 at Chaubepur, Kanpur.

[27] Four days training program on “Community mobilization for SHG Formation and Economic activation” organized by College of Home Science on April 10th 2000.

[28] Lecture Delivered in training program organized by the directorate of extension for U.P. Government Agriculture officers on the topic “Zero tillage and its machines” held on February 23rd 2001 at CSAU, Kanpur.

[29] Lecture Delivered in training program organized by the directorate of extension for U.P. Government Agriculture officers on the topic zero tillage and its machines held on March 16th 2008 at CSAU, Kanpur.

Other Achievements

[1] Established one seed processing plant at Oil Seeds Farm, Kalyanpur, C.S. Azad University of Agriculture and Technology, Kanpur in the year 1977-78

[2] Participated in project preparation work for Madhurikund Farm, Mathura for submission to World Bank which was later financed by ICAR, New Delhi and World Bank under National Seed Project.

[3] Worked as in charge for the initial establishment of ARIS cell and computerization work in C.S. Azad University of Agriculture and Technology, Kanpur.

[4] Established new technology based (both imported and indigenous machines) Seed Processing Plants at Rajasthan State and Orissa State at different places and also remain Engineer in charge for maintain old processing plant machines on turn key basis system during the period of March 2nd1981 to march 6th 1984 as remained with National Seed Corporation Ltd, (A Govt. of India Undertaking), New Delhi. (As Remain on Foreign service) under World Bank financial support scheme.

[5] Worked as trainer in computer operation at ARIS cell C.S. Azad University of Agriculture and Technology, Kanpur.

[6] Participated in the establishment of Baba Saheb Dr. B.R. Ambedkar College of Agricultural Engineering And Technology, Etawah.

[7] Controlled the college of Agricultural  Engineering and Technology work from Kanpur, worked as Examination Controller also upto about five years.

[8] Worked as coordinator for the teaching of some of the courses (like Auto-CAD, Electrical engineering, Physics) of B.Tech with H.B.T.I, Kanpur for which the Lab facilities were not available with C.S. Azad University of Agriculture and Technology, Kanpur till the year 2000

[9] Remain external examiner for various courses of Mechanical Engineering running in H.B.T.I, Kanpur in various years and also worked as paper setter for U.P.T.U, Lucknow.

[10] Conducted the work of preparation of specifications of various items needed in the university at the request of university store purchase officer.

BIO-DATA

Name: ANIL KUMAR SINGHAL

Mailing Address:  Anil Kumar Singhal

Plot No. 110, Ganga Nagar Housing Society,

Near- K.E.S.A. Colony, New Azad Nagar.

Kanpur-208002.

E-mail: aksinghal99@rediffmail.com

Date of Birth: June 10th 1951

Educational Qualifications:

S no.         Degree University Subject Percentage Year
1 B.Tech G.B. Pant University       Agricultural and Technology, PantnagarDistt. Nainital(Uttarakhand)

 

 

Agriculture          Engineering  56/II March 1975
2 M.Tech (Part time) H.B.T.I. Kanpur(Kanpur University)  MechanicalEngineering  63.57/I 22 August 1987
3 PhD G.B. Technical University ,LucknowUnder the supervision of :Dr. J Ramkumar, Asso. Prof.  Mechanical Engineering Department, IIT, Kanpur

 

Dr. R.K. Singh, Emeritus Scientist, Defence Material and Store Research and Development Establishment  (DRDO),Kanpur.

Mechanical EngineeringWorkplace:

1 IIT, Kanpur.

2 DMSRDE Labs, Kanpur

  Awarded on 29th June 2013

 

 

Details about the previous and present appointments:

 

S no. Post Held Employer Pay Scale Period Nature of Duties
From To
1 Engineering Supervisor Regional Manager Lucknow HQ. NSC, New Delhi Rs 13.50 /day 9/4/1975 2/6/1975 Establishment of High Capacity Seed Processing Plants etc.
2 Apprentice Engineer Regional Manager Lucknow HQ. NSC, New Delhi Rs 400/month/Consolidated 3/6/1975 12/1/1976 Establishment of High Capacity Seed Processing Plants etc.
3 Engineer Seed Processing Plant CSAU&T,Kanpur Rs 400/month fixed 12/3/1976 9/11/1976 To establish the first university seed processing plant and its design etc
4 Service Engineer ChairmanRam Ganga Command Area (Nigam) Rs 450/month after 6 Months conversion into Rs 550-1200 10/11/1976 25/4/1977 To maintain the fleet of tractors and other machines at Ram Ganga command area(Nigam Ltd.) ,Kanpur
5 Assistant Agriculture Engineer/Assitant professor CSAU&T Kanpur Rs 550-1200/700-1600(UGC) 26/4/1977 28/2/1981 To establish the first university seed processing plant and its design etc
6 Assistant Agriculture Engineer Chairman NSC Ltd. Pusa,New Delhi Rs 700-1300 2/3/1981 6/3/1984 Establishment of High Capacity Seed Processing Plants etc. of Rajasthan State and Orissa State on turn key basis
7 Assistant Agriculture Engineer/Assistant Professor/Associate prof. CSAU&TKanpur Rs 550-1200/700-1600UGC

Selection Grade Total Salary 82,924/month pending re fixation and revision of designation.

20/3/1984 30/6/2013 Teaching Research and extension as per Bio-Data
8 Director Vision Institute of Technology Rs-50,000/- 7 Aug2013 10 Jan 14